GI Steel Sheet | Mild Steel | HR CR Sheet Coils | PPGI Steel Coils | Perforated Sheet | GI - Steel Lintel supplier in UAE | Oman | Saudi | Qatar

GI Steel Sheet | Mild Steel | HR CR Sheet Coils | PPGI Steel Coils | Perforated Sheet | GI – Steel Lintel 2017-08-15T10:51:39+00:00

Galvanized Steel Sheet | Mild Steel | HR Sheet Coils | CR Sheet Coils | Pre Painted Galvanized Steel Coils | Perforated Sheet supplier in Dubai | UAE | Oman | Saudi | Qatar

Galvanized (GI) Lintel , Stainless SS Lintel in Dubai | UAE | Oman | Saudi | Qatar

Galvanized (GI) Lintel , Stainless SS Lintel in Dubai | UAE | Oman | Saudi | Qatar

Ghosh Group, Ajman, Dubai, United Arab Emirates – started Galvanized Lintel manufacturing from August 2012.

Ghosh Metal Industries LLC, has a very strong and energetic technical team to process quality production of the GI Lintel.

Propping Galvanized and Stainless Steel lintel is sometimes installed to facilitate speed of construction. It should only be introduced after initial masonry load has been applied to the lintel. When propping a lintel, a horizontal timber plank should be placed along the underside of the lintel and suitable props secured into place at maximum 1220 mm centres.

The Galvanized Steel we use to manufacturing of our GI lintel is ASTM A653, Grade 50, Structural Quality with 275 GSM Zinc Coating. The external GI Lintel Flange 50 mm to 150 mm.

Galvanized and Stainless Steel Lintels should be installed with a minimum end bearing of 151mm, bedded on mortar and levelled along its length and across its width. Point loads should not be applied directly onto lintel flanges. Lintels should have a minimum of masonry 151mm high between the flange and the application level of any form of loading.

Ghosh Metal Industries – manufacture GI Lintel, Stainless Steel Lintel, Powder Coated GI Lintel with the

Thickness range – 1.5 mm to 4.0 mm
Inner width – 153 mm to 203 mm
Length – 900 mm to 2200 mm Or
Customized according to our customer’s requirement

Today Ghosh Group is well known in Dubai | UAE | Oman | Saudi and Qatar for its GI lintel supply to Bahrain, Kuwait, Iraq, Sriya, Jordan etc.,

ENQUIRE | FILL THE FORM
or
CALL US

(works on mobile or calling device)

HOT Roll Sheet Coils – HR Coils supplier in UAE | Oman | Saudi | Qatar

Hot Rolled Steel (HR) Coil/Sheet/Slit Coil supplier in Dubai | UAE | Oman | Saudi | Qatar

Hot rolling is a mill process which involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel’s recrystallization temperature. When steel is above the recrystallization temperature, it can be shaped and formed easily, and the steel can be made in much larger sizes. Hot rolled steel is typically cheaper than cold rolled steel due to the fact that it is often manufactured without any delays in the process, and therefore the reheating of the steel is not required (as it is with cold rolled). When the steel cools off it will shrink slightly thus giving less control on the size and shape of the finished product when compared to cold rolled.

Ghosh Group is the leading importer and stockist of the Hot Rolled Steel Coils and sheet in GCC Market imported Origin India, China, Russia, KSA, Iran. We are into the catering of Hot Rolled Steel to the market of UAE, Oman, Qatar, Bahrain and Africa.

Uses:
Hot rolled products like hot rolled steel bars are used in the welding and construction trades to make railroad tracks and I-beams, for example. Hot rolled steel is used in situations where precise shapes and tolerances are not required.

Thickness: 1.2 mm to 11.7 mm.
Width: 30 mm to 1220 mm.
Coil / Sheet: These are subject to customer choice and standard in the GCC Market.

Hot Rolled Sheet Grade confirming to ASTM A36, ST – 37 /2, ST 44, S235JR, S275JR and S355JR

ENQUIRE | FILL THE FORM
or

CALL US

(works on mobile or calling device)

For enquiry and sales, please email us on parimal@ghoshgroups.com or call +971 553 258 409

If you are on smartphone, press the nos to call directly

Cold Rolled Steel Coil – CR Sheet supplier in UAE | Oman

Cold Rolled sheet supplier in UAE, Oman | Saudi | Dubai

Cold rolled steel is essentially hot rolled steel that has had further processing. The steel is processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling. This process will produce steel with closer dimensional tolerances and a wider range of surface finishes. The term Cold Rolled is mistakenly used on all products, when actually the product name refers to the rolling of flat rolled sheet and coil products.

When referring to bar products, the term used is “cold finishing”, which usually consists of cold drawing and/or turning, grinding and polishing.

This process results in higher yield points and has four main advantages:
Cold drawing increases the yield and tensile strengths, often eliminating further costly thermal treatments.
Turning gets rid of surface imperfections. Grinding narrows the original size tolerance range. Polishing improves surface finish.
All cold products provide a superior surface finish, and are superior in tolerance, concentricity, and straightness when compared to hot roll.

Cold finished bars are typically harder to work with than hot rolled due to the increased carbon content. However, this cannot be said about cold rolled sheet and hot rolled sheet. With these two products, the cold rolled product has low carbon content and it is typically annealed, making it softer than hot rolled sheet.

Uses:
Any project where tolerances, surface condition, concentricity, and straightness are the major factors.

Ghosh Group – Globe Metal and Power FZE is the leading importer of the Cold Rolled Steel Coils from its reliable source in India and China.

The grade we import are JIS G3302, JIS G3141 SPCC SPSD or as per customer requirement.

Thickness: 0.50 mm to 1.5 mm.
Width: 50 mm to 1220 mm.
Coil ID: 508 mm to 610 mm.
Grade: SPCC SD, G3303.

ENQUIRE | FILL THE FORM
or

CALL US

(works on mobile or calling device)

Galvanized Steel Sheet supplier in UAE| Oman | Saudi | Qatar

Pre Painted Galvanized (PPGI) Steel Coils dealer in Dubai | UAE | Oman | Saudi | Qatar

Standard: ASTM BS DIN JIS GB.
Grade: SGCC, SGCH, SGCE, SPCG, DB51D.
Thickness: 0.30 mm to 2.5 mm.
Width: 21 mm to 1500 mm.
Coil ID: 508 mm to 610 mm.
Coil Wt.: Up to 12 MT.
Zinc Coating: 120 GSM to 275 GSM.
Customization: As per our customer needs, Lock forming quality, Regular Spangle, Minimum spangle, Zero spangle.

A galvanized steel sheet is a sheet of steel that has been galvanized in order to help prevent corrosion. These sheets can be used in a variety of applications including in furniture, cars, or in making tool boxes. The process is done in order to help steel stave off corrosion caused by exposure to other metals in the presence of an electrolyte or to oxygen and water. By putting on a barrier to coat the steel, a galvanized steel sheet is able to better resist the destructive forces acting against it. It must be noted, however, that this coating can deteriorate over time.

Ghosh Group GI – The process of hot-dip galvanizing results in a metallurgical bond between zinc and steel with a series of distinct iron-zinc alloys. The resulting coated steel can be used in much the same way as uncoated. Galvanized steel can be welded; however, one must exercise caution around the resulting zinc fumes. Galvanized steel is suitable for high-temperature applications of up to 392 °F (200 °C). Use at temperatures above this level will result in peeling of the zinc at the intermetallic layer. Galvanized sheet steel is commonly used in automotive manufacture to enhance corrosion performance of exterior body panels of some models.

We, Ghosh Group offer a wide range of galvanized steels in different range, size and thickness based on the requirement of our customers. These are highly durable and are responsive to rigorous fabrication, weld consistency and have superior finish and increased bend ability. These galvanized steel are suitable to be used in irrigation, water supply, plumbing, water wells, cold storage applications and various other industries.

Sheet Metal Gauge Size Chart Gauge (or gage) sizes are numbers that indicate the thickness of a piece of sheet metal, with a higher number referring to a thinner sheet. The equivalent thicknesses differ for each gauge size standard, which were developed based on the weight of the sheet for a given material. The Manufacturers’ Standard Gage provides the thicknesses for standard steel, galvanized steel, and stainless steel.

The Brown and Sharpe Gage, also known as the American Wire Gage (AWG), is used for most non ferrous metals, such as Aluminium and Brass. In the UK, the Birmingham Gage (BG) is used for a variety of metals and should not be confused with the Birmingham Wire Gage (BWG), which is used for wires.

Lastly, a standard exists for Zinc in which a higher gauge number indicates a thicker sheet.

ENQUIRE | FILL THE FORM
or

CALL US

(works on mobile or calling device)

Pre Painted Galvanized Steel Coils (PPGI) supplier in UAE | Oman

Pre Painted Galvanized Steel Coils (PPGI) dealer in alt=

PPGI is pre-painted galvanised steel, also known as percolated steel, coil coated steel, colour coated steel etc.,

A galvanised steel sheet in coil form is cleaned, pre-treated, applied with various layers of organic coatings which can be paints, vinyl dispersions, or laminates. These coatings are applied in a continuous process known as Coil Coating. The steel thus produced in this process is a pre-painted, prefinished ready to use material. PPGI is the material which uses galvanised steel as the basic substrate metal. There could be other substrates such as aluminium, Galvalume, stainless steel, etc. Over 10 million tons of such coated steel is produced today in over 300 coating lines in the Globe.

We, Ghosh Group specialize in offering a range of high quality PPGI Sheets, available in different sizes and standards to meet client’s requirement. These sheets are available in various standards and thus find application like swimming pools, parking area of multi stored building and shopping complex, gardens, terrace, open to sky areas etc. These sheets are designed in various attractive shades to enhance the exterior of homes, offices, and various other buildings. Further, these PPGI Sheets can also be custom designed as per the exact details provided by Customers. PPGI sheets provided by our company are extensively used in construction industry. Our sheets have excellent corrosion resistance thus preferred in a number construction application; broadly these are used in roofing and walling. These sheets are chosen for delivering quality performance that goes on for several years.

Thickness: 0.30 mm to 1.50 mm.
Width: 50 mm to 1219 mm
Coil ID: 508 mm.
Top Paint: 5+20 Micron.
Bottom Paint: 5+7 Micron.
Coil Weight: 3.5 to 4.5 MT.
Zinc Coating: 40 GSM to 120 GSM.

Ghosh Metal Industries and Globe Metal and Power FZE– offer a wide range of color for its construction site fencing in Abu Dhabi, Dubai, Ajman, Sharjah, Ras Al Khaima, Fujirah, Al ain in UAE subject to its customer’s Choice like RAL 9002 – Off White, RAL 1001 Beige, RAL 5012 Light Blue, RAL 5010 Dark Blue, RAL 5002 EMMAR Blue, RAL 7046 Dark Grey, RAL 7036 Grey, RAL 7037 Grey, RAL 1014 light beige, RAL 1015 Ivory, RAL 9003 White, RAL 9010 Pure White, RAL 3002 RED, RAL 3020 RED, RAL 2004 Orange, RAL 7015 Grey, RAL 6038 Green, RAL 6029 Light Green, and more.

Grade: ASTM A653, Lock Forming Quality.
Origin: India and China.

Ghosh Group of Companies is the leading stockist and importer of the pre painted galvanized steel coils (PPGI) in the UAE and GCC Market.

We also cover the market of Durban, Cape Town, Port Elizabeth, Mombasa, Dar Es Salaam, Maputoport, Louis Abidjan Lagos.

Ghosh Group is engaging to supply its Pre Painted Galvanized Steel Coil to most of the profile, sandwich panel factory in UAE and GCC including some african companies.

Ghosh Metal has a huge customer base of Rolling Shutter manufacturer in Oman , UAE , KSA for their requirement of Pre Painted Galvanized Slitting Steel Coil and Galvanized steel Slit Coil.

ENQUIRE | FILL THE FORM
or

CALL US

(works on mobile or calling device)

Galvanized Perforated Sheet supplier in UAE | Oman | Saudi | Qatar

Galvanized Perforated Sheet supplier in UAE | Oman | Saudi | Qatar

Ghosh Metal Industries galvanized steel perforation house having facilities for perforation of Steel Sheet:
Thickness: 0.50 mm to 1.2 mm.

Galvanized Steel Coil and Sheet:
Width: 1000 mm / 1219 mm.
Length of the sheet: Subject to our customer choice.

Grade of the Iron Galvanized Steel Sheet ASTM A653, Zinc 275 GSM.
Origin: India, China, POSCO Korea / India.

Ghosh Metal Industries galvanized sheet metal perforation:
Hole: 3 mm x Pitch 5 mm and 5 mm
Hole: 5 mm x Pitch 10 mm.
Pattern of the Perforation 60 degree angle.

ENQUIRE | FILL THE FORM
or

CALL US

(works on mobile or calling device)

Galvanized (GI) Lintel , Stainless SS Lintel in Dubai | UAE | Oman | Saudi | Qatar

Galvanized (GI) Lintel , Stainless SS Lintel in alt=

Ghosh Group, Ajman, Dubai, United Arab Emirates – started Galvanized Lintel manufacturing from August 2012.

Ghosh Metal Industries LLC, has a very strong and energetic technical team to process quality production of the GI Lintel.

Propping Galvanized and Stainless Steel lintel is sometimes installed to facilitate speed of construction. It should only be introduced after initial masonry load has been applied to the lintel. When propping a lintel, a horizontal timber plank should be placed along the underside of the lintel and suitable props secured into place at maximum 1220 mm centres.

The Galvanized Steel we use to manufacturing of our GI lintel is ASTM A653, Grade 50, Structural Quality with 275 GSM Zinc Coating. The external GI Lintel Flange 50 mm to 150 mm.

Galvanized and Stainless Steel Lintels should be installed with a minimum end bearing of 151mm, bedded on mortar and levelled along its length and across its width. Point loads should not be applied directly onto lintel flanges. Lintels should have a minimum of masonry 151mm high between the flange and the application level of any form of loading.

Ghosh Metal Industries – manufacture GI Lintel, Stainless Steel Lintel, Powder Coated GI Lintel with the

Thickness range – 1.5 mm to 4.0 mm
Inner width – 153 mm to 203 mm
Length – 900 mm to 2200 mm Or
Customized according to our customer’s requirement

Today Ghosh Group is well known in Dubai | UAE | Oman | Saudi and Qatar for its GI lintel supply to Bahrain, Kuwait, Iraq, Sriya, Jordan etc.,

ENQUIRE | FILL THE FORM
or
CALL US

(works on mobile or calling device)

Galvanized (GI) Lintel , Stainless SS Lintel in alt=

Pre Painted Galvanized Steel Coil supplier in Dubai | UAE | Oman | Saudi | Qatar

Our Values

Ghosh Group (Roofing sheet manufacturer Steel importer UAE) strives to be a RELIABLE service provider and is COMMITTED to deliver the best output and highest quality service through the dedicated effort of every team member with accountability & determination.